COMPUTER MEDIATED COLLABORATIVE DESIGN IN ARCHITECTURE: THE EFFECTS OF COMMUNICATION CHANNELS ON COLLABORATIVE DESIGN COMMUNIATION

Up till now, architects collaborating with other colleagues did so mostly face-to-face (FTF). They had to be in the same space (co-located) at the same time. Communi-cation was ‘spontaneous’ and ideas were represented, whether verbal or non-verbal, by talking and using ‘traditional drawing tools’. If they were geographically displaced, the interaction was then space affected as well as the probability of being time affected. In this case communication was usually mediated through the tele-phone, and graphically represented ideas were sent by Fax or posted documents. Recently, some architectural firms started using modems and Internet connections to exchange information, by transferring CAD drawings as well as design informa-tion, through e-mail and file transfer protocol (FTP). Discussing ideas in architecture, as a more abstract notion, is different from discuss-ing other more concrete arguments using video conferencing. It is more important to ‘see’ what is being discussed at hand than ‘watch’ the other person(s) involved in the discussion. In other words the data being conveyed might be of more impor-tance than the mode of communication. Taking into consideration recent developments in computer and communication technologies this thesis investigates different communication channels utilised in architectural collaboration through Computer Mediated Collaborative Design (CMCD) sessions as opposed to FTF sessions. This thesis investigates the possi-ble effects these different channels have on collaborative design in general and col-laborative design communication in particular. We argue that successful CMCD does not necessarily mean emulating close prox-imity environments. Excluding certain communication channels in a CMCD envi-ronment might affect the flow and quantity of synchronous collaborative communica-tion, but not necessarily the quality and content of mutually communicated and rep-resented design ideas. Therefore different communication channels might affect the type of communication and not necessarily the content of the communication. We propose that audio and video are not essential communication channels in CMCD environments. We posit that architects will collaborate and communicate design representations effectively although with some differences, since those two chan-nels might cause interruptions and successful collaborative sessions can take place without them. For this purpose we conducted twenty-four one-hour experiments involving final year architecture students all working to the same design brief. The experiments were divided into three categories, FTF, full computer mediated collaborative design sessions (CMCD-a; audio-video conferencing plus whiteboard as a shared drawing space) and limited computer mediated collaborative design sessions (CMCD-b; with Lambda MOO used as a chat medium plus whiteboard as a shared drawing space). The experiments were video and audio taped, transcribed and coded into a custom developed coding scheme. The results of the analysed coded data and observations of the videotapes provided evidence that there were noticeable differences between the three categories. There was more design communication and less communication control in the CMCD-b category compared to the FTF and CMCD-a categories. Verbal communi-cation became shorter and straight to the point in CMCD-b as opposed to spontane-ous non-stop chat in the other two categories. Moreover in CMCD-b the subjects were observed to be more reflective as well as choosing and re-examining their words to explain ideas to their partners. At times they were seen scrolling back through the text of the conversation in order to re-analyse or interpret the design ideas at hand. This was impossible in FTF and CMCD-a sessions, since the sub-jects were more spontaneous and audio representations were lost as soon as they were uttered. Also the video channel in the CMCD-a category was ignored and hardly used except for the first few minutes of the experiments, for a brief exchange of light humour on the appearance of each subject. The results obtained from analysing the experiments helped us conclude that differ-ent communication channels produce different collaborative environments. The three categories of communication for architectural collaboration explored in our ex-periments are indicative of the alternatives available to architects now. What is not clear to architects is why they would choose one category over another. We pro-pose that each category has its own strengths and difficulties for architectural col-laboration, and therefore should be selected on the basis of the type of communica-tion considered to be most effective for the stage and tasks of the design project

Soil resources and element stocks in drylands to face global issues

Drylands (hyperarid, arid, semiarid, and dry subhumid ecosystems) cover almost half of Earth’s land surface and are highly vulnerable to environmental pressures. Here we provide an inventory of soil properties including carbon (C), nitrogen (N), and phosphorus (P) stocks within the current boundaries of drylands, aimed at serving as a benchmark in the face of future challenges including increased population, food security, desertification, and climate change. Aridity limits plant production and results in poorly developed soils, with coarse texture, low C:N and C:P, scarce organic matter, and high vulnerability to erosion. Dryland soils store 646 Pg of organic C to 2 m, the equivalent of 32% of the global soil organic C pool. The magnitude of the historic loss of C from dryland soils due to human land use and cover change and their typically low C:N and C:P suggest high potential to build up soil organic matter, but coarse soil textures may limit protection and stabilization processes. Restoring, preserving, and increasing soil organic matter in drylands may help slow down rising levels of atmospheric carbon dioxide by sequestering C, and is strongly needed to enhance food security and reduce the risk of land degradation and desertification

Hyperoxemia and excess oxygen use in early acute respiratory distress syndrome : Insights from the LUNG SAFE study

Publisher Copyright: © 2020 The Author(s). Copyright: Copyright 2020 Elsevier B.V., All rights reserved.Background: Concerns exist regarding the prevalence and impact of unnecessary oxygen use in patients with acute respiratory distress syndrome (ARDS). We examined this issue in patients with ARDS enrolled in the Large observational study to UNderstand the Global impact of Severe Acute respiratory FailurE (LUNG SAFE) study. Methods: In this secondary analysis of the LUNG SAFE study, we wished to determine the prevalence and the outcomes associated with hyperoxemia on day 1, sustained hyperoxemia, and excessive oxygen use in patients with early ARDS. Patients who fulfilled criteria of ARDS on day 1 and day 2 of acute hypoxemic respiratory failure were categorized based on the presence of hyperoxemia (PaO2 > 100 mmHg) on day 1, sustained (i.e., present on day 1 and day 2) hyperoxemia, or excessive oxygen use (FIO2 ≥ 0.60 during hyperoxemia). Results: Of 2005 patients that met the inclusion criteria, 131 (6.5%) were hypoxemic (PaO2 < 55 mmHg), 607 (30%) had hyperoxemia on day 1, and 250 (12%) had sustained hyperoxemia. Excess FIO2 use occurred in 400 (66%) out of 607 patients with hyperoxemia. Excess FIO2 use decreased from day 1 to day 2 of ARDS, with most hyperoxemic patients on day 2 receiving relatively low FIO2. Multivariate analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FIO2 use and adverse clinical outcomes. Mortality was 42% in patients with excess FIO2 use, compared to 39% in a propensity-matched sample of normoxemic (PaO2 55-100 mmHg) patients (P = 0.47). Conclusions: Hyperoxemia and excess oxygen use are both prevalent in early ARDS but are most often non-sustained. No relationship was found between hyperoxemia or excessive oxygen use and patient outcome in this cohort. Trial registration: LUNG-SAFE is registered with ClinicalTrials.gov, NCT02010073publishersversionPeer reviewe

Azimuthal anisotropy of charged jet production in root s(NN)=2.76 TeV Pb-Pb collisions

We present measurements of the azimuthal dependence of charged jet production in central and semi-central root s(NN) = 2.76 TeV Pb-Pb collisions with respect to the second harmonic event plane, quantified as nu(ch)(2) (jet). Jet finding is performed employing the anti-k(T) algorithm with a resolution parameter R = 0.2 using charged tracks from the ALICE tracking system. The contribution of the azimuthal anisotropy of the underlying event is taken into account event-by-event. The remaining (statistical) region-to-region fluctuations are removed on an ensemble basis by unfolding the jet spectra for different event plane orientations independently. Significant non-zero nu(ch)(2) (jet) is observed in semi-central collisions (30-50% centrality) for 20 <p(T)(ch) (jet) <90 GeV/c. The azimuthal dependence of the charged jet production is similar to the dependence observed for jets comprising both charged and neutral fragments, and compatible with measurements of the nu(2) of single charged particles at high p(T). Good agreement between the data and predictions from JEWEL, an event generator simulating parton shower evolution in the presence of a dense QCD medium, is found in semi-central collisions. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe

Forward-central two-particle correlations in p-Pb collisions at root s(NN)=5.02 TeV

Two-particle angular correlations between trigger particles in the forward pseudorapidity range (2.5 2GeV/c. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B. V.Peer reviewe

Event-shape engineering for inclusive spectra and elliptic flow in Pb-Pb collisions at root(NN)-N-S=2.76 TeV

Peer reviewe

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals &lt;1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Pseudorapidity and transverse-momentum distributions of charged particles in proton-proton collisions at root s=13 TeV

The pseudorapidity (eta) and transverse-momentum (p(T)) distributions of charged particles produced in proton-proton collisions are measured at the centre-of-mass energy root s = 13 TeV. The pseudorapidity distribution in vertical bar eta vertical bar <1.8 is reported for inelastic events and for events with at least one charged particle in vertical bar eta vertical bar <1. The pseudorapidity density of charged particles produced in the pseudorapidity region vertical bar eta vertical bar <0.5 is 5.31 +/- 0.18 and 6.46 +/- 0.19 for the two event classes, respectively. The transverse-momentum distribution of charged particles is measured in the range 0.15 <p(T) <20 GeV/c and vertical bar eta vertical bar <0.8 for events with at least one charged particle in vertical bar eta vertical bar <1. The evolution of the transverse momentum spectra of charged particles is also investigated as a function of event multiplicity. The results are compared with calculations from PYTHIA and EPOS Monte Carlo generators. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe

Elliptic flow of muons from heavy-flavour hadron decays at forward rapidity in Pb-Pb collisions at root s(NN)=2.76TeV

The elliptic flow, v(2), of muons from heavy-flavour hadron decays at forward rapidity (2.5 <y <4) is measured in Pb-Pb collisions at root s(NN)= 2.76TeVwith the ALICE detector at the LHC. The scalar product, two- and four-particle Q cumulants and Lee-Yang zeros methods are used. The dependence of the v(2) of muons from heavy-flavour hadron decays on the collision centrality, in the range 0-40%, and on transverse momentum, p(T), is studied in the interval 3 <p(T)<10 GeV/c. A positive v(2) is observed with the scalar product and two-particle Q cumulants in semi-central collisions (10-20% and 20-40% centrality classes) for the p(T) interval from 3 to about 5GeV/c with a significance larger than 3 sigma, based on the combination of statistical and systematic uncertainties. The v(2) magnitude tends to decrease towards more central collisions and with increasing pT. It becomes compatible with zero in the interval 6 <p(T)<10 GeV/c. The results are compared to models describing the interaction of heavy quarks and open heavy-flavour hadrons with the high-density medium formed in high-energy heavy-ion collisions. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V.Peer reviewe